Replace A Fan Module In An Nvme Expansion Enclosure; Identify A Faulted Fan Module From Powerstore Manager; Remove A Fan Module - Dell PowerStore 1000 Installation And Service Manual

Steps
1. Package the faulted part in the shipping box that contained the replacement part.
2. Ship the failed part to your service provider as described in the instructions that were included with the replacement part.
3. For more information about returning customer-replaceable parts:
a. Open PowerStore Manager.
b. Click Settings on the upper right of the screen.
c. Click General Support.
d. Under Drives, Power Supplies, and Other Parts, click Return Part.
e. If your screen does not show the Return Part link, contact your service provider for instructions.

Replace a fan module in an NVMe expansion enclosure

Take the following actions to remove the faulted fan module from the NVMe expansion enclosure and install a replacement fan.

Identify a faulted fan module from PowerStore Manager

Before you replace a fan module, ensure that you have identified its location within the system. Using PowerStore Manager, you
can identify and locate a faulted fan module.
Steps
1. From PowerStore Manager, select Hardware.
2. Select the appliance that includes the fan module that you need to replace.
3. On the Components card, under Internal View, expand the node that includes the fan module, and then select the relevant
FanModule.
Faulted parts appear in red in the image of the system, and report a status of Faulted in the State field.

Remove a fan module

Steps
1. Pull the expansion enclosure from the rack until the system cover is accessible.
2. Lift open the system cover.
CAUTION: Do not leave the system cover open for more than two minutes. If you need more time, close the
cover and allow the system temperature to stabilize before proceeding.
150 NVMe expansion enclosure service procedures