Compliance and Certifications
Safety
Note
For UL and other safety certifications refer to the product label or visit
Electromagnetic Compatibility
Note
For EMC compliance, you must operate this device with shielded cabling.
CE Compliance
Note
Refer to the Declaration of Conformity (DoC) for this product for any additional
regulatory compliance information. To obtain the DoC for this product, click Declarations
of Conformity Information at
© National Instruments Corporation
This product is designed to meet the requirements of the following
standards of safety for electrical equipment for measurement, control,
and laboratory use:
•
IEC 61010-1, EN 61010-1
•
UL 3111-1, UL 61010B-1
•
CAN/CSA C22.2 No. 1010.1
Emissions ............................................... EN 55011 Class A at 10 m
Immunity................................................ EN 61326:1997 + A2:2001,
EMC/EMI............................................... CE, C-Tick, and FCC Part 15
This product meets the essential requirements of applicable European
Directives, as amended for CE marking, as follows:
Low-Voltage Directive (safety) ............. 73/23/EEC
Electromagnetic Compatibility
Directive (EMC) .................................... 89/336/EEC
ni.com/certification
FCC Part 15A above 1 GHz
Table 1
(Class A) Compliant
.
7
.
ni.com
NI SCXI-1366 Installation Guide