Sony Cyber-shot DSC-12 Operating Instructions Manual page 115

Setup 1)
(
1
Item Setting
LCD Backlight
Bright /
Dark
Beep
Shutter
x
On
Off
—
Language
A
(Setup 2)
2
Item Setting
File Number x
Series
Reset
USB Connect PictBridge / PTP /
x
Normal
Video Out NTSC
PAL
Clock Set OK / Cancel
Description
x
Normal / Selects the brightness of the LCD backlight. Selecting [Bright] makes the screen bright and easy
to see when using the camera outdoors or in other bright locations, but also uses up the battery
charge faster. Displayed only when you are using the camera with the batteries.
– Turns on the shutter sound when you press the shutter button.
– Turns on the beep/shutter sound when you press the control button/ press the shutter button.
– Turns off the beep/shutter sound.
Displays the menu items, warnings and messages in selected language.
Description
– Assigns numbers to files in sequence even if the "Memory Stick" is changed or the recording
folder is changed.
– Resets the file numbering and starts from 0001 each time the folder is changed. (When the
recording folder contains a file, a number one higher than the largest number is assigned.)
Switches the USB mode when connecting with a computer or a PictBridge compliant printer
using the USB cable (pages 71, 82, 84 and 93).
– Sets the video output signal to NTSC mode (e.g., USA, Japan).
– Sets the video output signal to PAL mode (e.g., Europe).
Sets the date and time (pages 18 and 46).
115