Encoder Statistics; Encoder Regions - Bosch MIC-7504-Z12WR User Manual

MIC IP ultra 7100i │ MIC IP starlight 7100i
Profile number
Profile 3
Profile 4
Profile 5
Profile 6
Profile 7
Profile 8
Note: Non-recording profiles (streams) are I-frame only.
Note: Each stream can have its own independent profile which does not need to be shared
with other streams.
Active profile
Each stream shows its active profile. When you click the name, the Encoder Profile (stream
(number), profile (number)) window appears. Refer to the chapter Encoder Profile, page 27
for details.
Video resolution
Select the desired resolution for the video image.
Note: Each stream can have its full resolution.
Encoding interval
The Encoding interval slider determines the interval at which images are encoded and
transmitted. This can be particularly advantageous with low bandwidths. The frame rate is
displayed next to the slider.
Click Test to see when and if a specific stream will drop frames.
5.5

Encoder Statistics

Stream
Identifies the current stream (1, 2, or JPEG).
Zoom
Identifies the current zoom factor of the camera (1x, 2x, 4x, or 8x).
Averaging period
Select the appropriate averaging period as a means of stabilizing the long term bit rate.
5.6

Encoder Regions

User can configure encoding regions for every configured preset (preposition/scene), to
increase or decrease the encoding quality for selectable areas of the video image. These
regions give better control of the bit rate. Important parts of the scene (identified as objects
in the GUI) are encoded at high resolution and therefore have an enhanced encoding quality.
Bosch Security Systems
Default Profile name
HD Bit Rate
Optimized
SD Image Optimized
SD Balanced
SD Bit Rate
Optimized
DSL Optimized
3G Optimized
User Manual
Description
For an HD image, the video bit rate and frame
quality are adjusted to ensure that the bit rate is
the priority.
For an SD image, the video bit rate and frame
quality are adjusted to ensure that the picture
quality is the priority.
For an SD image, the video bit rate and frame
quality are adjusted to a median profile for
everyday use.
For an SD image, the video bit rate and frame
quality are adjusted to ensure that the bit rate is
the priority.
Ideal for encoding on a DSL uplink where bit rate
limitations are critical.
Ideal for encoding on a 3G uplink where bit rate
limitations are critical.
Camera | en 31
2020-07 | 1.2 |