Table of Contents
Advertisement
FLEXIDOME corner 7100i IR
Click Set to apply the changes.
4.4.11
Encoder Statistics
This section gives the user information about the bit rate of the device. For each scene, it is
possible to determine the best target/max bit rate through the graphic shown.
Stream
Identifies the current stream.
Zoom
Identifies the current zoom factor of the camera (1x, 2x, 4x, or 8x).
Averaging period
Identifies how often (in seconds, minutes, hours, days or weeks) the encoder time is
synchronized to the actual time.
4.4.12
Privacy Masks
Privacy Masks block specific areas of a scene from being seen in the camera's field of view.
This can be useful when public spaces are in the coverage area or monitoring will be limited
to a particular zone.
Pattern
Select the color of the mask as it will appear in the live video: Auto, Black, Gray, White or
Custom color.
When Auto is selected, for one or more masks with a similar background, these will try to
blend with the surrounding color. If the backgrounds have different colors, the masks will
average between the colors.
A total of eight (8) masks can be in view at the same time.
To configure a Privacy mask:
–
–
–
–
–
–
–
To delete a Privacy mask:
–
–
–
4.4.13
Audio
You can set the gain of the audio signals to suit your specific requirements. The live video
image is shown in the window to help you check the audio source. Your changes are
effective immediately.
If you connect via Web browser, you must activate the audio transmission on the 'Live'
functions page. For other connections, the transmission depends on the audio settings of
the respective system.
The audio signals are sent in a separate data stream parallel to the video data, and so
increase the network load. The audio data is encoded according to the selected format and
requires additional bandwidth. If you do not want any audio data to be transmitted, select
Off.
Bosch Security Systems
Select the mask number from the drop-down list.
Click the plus button.
Adjust the mask in the image:
Double-click on the edges to add or remove nodes.
Click and drag the nodes to position them correctly.
Check the Enabled check box to activate the related mask.
Click the Set button to apply the related changes.
Select the mask number from the drop-down list.
Click the trashcan icon.
Click the Set button to apply the changes.
User Manual
Configuration | en
2023-10 | V02 | F.01U.407.683
33
Advertisement
Table of Contents
