Dyndns; Advanced - Bosch MIC-7504-Z12WR User Manual

56 en | Network
8.3

DynDNS

Enable DynDNS
DynDNS.org is a DNS hosting service that stores IP addresses in a database ready for use. It
allows you to select the camera via the Internet using a host name, without having to know the
current IP address of the unit. You can enable this service here. To do this, you must have an
account with DynDNS.org and you must have registered the required host name for the unit on
that site.
Notice!
Information about the service, registration process and available host names can be found at
DynDNS.org.
Provider
The value in this field defaults to dyndns.org. Select another option as necessary.
Host name
Enter the host name registered on DynDNS.org for the camera here.
User name
Enter the user name you registered at DynDNS.org here.
Password
Enter the password you registered at DynDNS.org here.
Force registration now
You can force the registration by transferring the IP address to the DynDNS server. Entries
that change frequently are not provided in the Domain Name System. It is a good idea to force
the registration when you are setting up the device for the first time. Only use this function
when necessary and no more than once a day, to avoid the possibility of being blocked by the
service provider. To transfer the IP address of the camera, click the Register button.
Status
The status of the DynDNS function is displayed here for information purposes. You cannot
change any of these settings.
8.4

Advanced

The settings on this page are used to implement advanced settings for the network.
Cloud-based services
Operation
The operation mode determines how the camera communicates with the Bosch Remote
Portal.
–
–
Cloud state
This field identifies any cloud-based services with which the camera communicates.
–
–
2020-07 | 1.2 |
Select On to poll the server constantly.
Select Off to block polling.
If you have registered the device on a cloud-based service such as Bosch Remote Portal,
then this field identifies this fact ("Registered on Bosch Remote Portal").
Note: The button (Connect to Bosch Remote Portal) to connect to the device with that
service is active.
If you have not registered the device, then the message, "Not running. (Automatic IP
assignment not active)" appears.
User Manual
MIC IP ultra 7100i │ MIC IP starlight 7100i
Bosch Security Systems