Pre-Position Settings - Bosch MIC-7504-Z12WR User Manual

MIC IP ultra 7100i │ MIC IP starlight 7100i
You define individual pre-position scenes, then use these scenes to define the Pre-position
Tour. The tour starts from the lowest scene number in the tour and progresses sequentially to
the highest scene number in the tour. The tour displays each scene for a specified dwell time
before advancing to the next scene.
By default, all scenes are part of the Pre-position Tour unless removed.
To define a Pre-position Tour:
1.
2.
3.
4.
5.
To define a Custom tour
1.
2.
3.
4.
5.
6.
Sequence settings
White light (marked with #)
Select this checkbox to include white light in the scene.
Include in standard tour (marked with *)
Select this checkbox to include the pre-position in the standard tour.
Upload
Click the button to upload the tour configuration to the camera.
Dwell times
Standard pre-position tour
Select the dwell time in seconds or minutes for the Standard pre-position tour.
Custom pre-position tour
Select the dwell time in seconds or minutes for the Custom pre-position tour.
5.11

Pre-position settings

Pre-position
Select the number of the pre-position for which to save specific settings.
Bosch Security Systems
Create the individual pre-positions.
By default, all scenes in the list Pre-positions are in the Pre-position Tour.
To remove a pre-position from the tour, select the pre-position in the list and uncheck the
box Include in standard tour (marked with *).
Select a dwell time from the drop-down list Standard pre-position tour.
To start the Pre-position Tour:
Return to the Live page.
Click AUX Control.
Type 8 in the input box and click AUX on.
To stop the tour, type 8 and click AUX off.
Create the individual pre-positions.
To add a pre-position into the custom tour, select the pre-position from the general list
and click the triangle button to copy it to the custom tour list.
Adjust the custom tour sequence by moving preposition up or down.
Select a dwell time from the drop-down list Custom tour .
To start the Custom tour:
Return to the Live page.
Select Special Functions.
Click AUX Control.
Type 7 in the input box and click AUX on.
To stop the tour, type 7 and click AUX off.
User Manual
Camera | en 37
2020-07 | 1.2 |