Dell PowerSwitch N3200-ON Series Installation Manual page 78

Where a.b.c.d represents the location to download the image file from, and x.x.xx represents the version number of the
software to install.
The NOS installer image may create multiple partitions during the installation process. After the installation process completes,
the switch automatically reboots into the new OS.
Install manually using a USB drive You can manually install the NOS software image using a USB device. Verify that the
USB device supports a FAT or EXT2 file system. For instructions to format a USB device in FAT or EXT2 format, see the
accompanying Windows documentation for FAT formatting or Linux documentation for FAT or EXT2 formatting.
1. Plug the USB storage device into the USB storage port on the switch.
2. Power up the switch to automatically boot using the ONIE: Rescue option.
3. (Optional) Stop ONIE discovery if the device boots to ONIE: Install.
$ onie-stop
4. Create a USB mount location on the system.
$ mkdir /mnt/media
5. Identify the path to the USB drive.
$ fdisk -l
6. Mount the USB media plugged in the USB port on the device.
$ mount -t vfat usb-drive-path /mnt/media
7. Install the software from the USB, where /mnt/media specifies the path where the USB partition is mounted.
$ onie-nos-install /mnt/media/image_file
The ONIE autodiscovery process discovers the image file at the specified USB path, loads the software image, and reboots the
switch. For more information, see the
78 Installation using ONIE
ONIE User Guide.