Using Record-A-Call; Using Group Listen - Mitel MiVoice Office 250 User Manual

Call Features

Using Record-A-Call

You can use Record-A-Call to record an ongoing call as a mailbox message.
retrieve the message from your voice mailbox. The Record-A-Call feature stays active after the
other party hangs up, so you can add to the recorded call with your own message.
To use Record-A-Call:
1. While on a call, press
2. Enter the voice mailbox number where you want the recording to be saved.
To stop Record-A-Call:

Using Group Listen

You can use Group Listen to activate the speaker while you use the handset or headset to
continue speaking. This allows other people to hear the other party on the call while the other
party can only hear you (through the handset microphone). You cannot use Group Listen in
Handsfree Mode.
To use Group Listen:
2.
Page 44
CALL appears.
RECORD-A-CALL IN PROGRESS appears, and both you and the calling party hear a
confirmation tone (if enabled).
If your system administrator assigns the Record-a-Call voice mailbox
NOTE
destination, you do not need to enter the voice mailbox number.
Do one of the following:

Press (Special), and then dial 385.

Hang up.
While on a call, press
LISTEN ON appears, and you hear a confirmation tone. The other party does not hear
the confirmation tone. Dial 312 again to turn Group Listen off.
This feature may or may not be enabled for your system.
(Special), and then dial 385. REQUESTING RECORD-A-
(Special), and then dial 312 to turn Group Listen on. GROUP
Mitel ® 8528 Telephone User Guide – Release 6.2, June 2016
2
You can then