Using Account Codes - Mitel MiVoice Office 250 User Manual

Answering and Placing Calls

Using Account Codes

Account codes record information for telephone record reports. You may be required to enter
account codes when placing calls. Contact your system administrator for more information
about using account codes.
There are three types of account codes:



To enter an optional account code:
1. While off-hook, press
2. Enter the optional account code, and then press #.
To set an account code for all calls placed from your telephone:
To disable the code:
Page 30
Standard account codes: Automatically entered into the telephone record report
whenever you place a call.
Forced account codes: Entered before you can place an outside call.
Optional account codes: Entered at any time during a call.
Dial 391 followed by the account code, and then press #. ACCOUNT CODE ACCEPTED
appears. This code is used for all calls made from your telephone until it is disabled.
Dial 391, and then press #. ACCOUNT CODE CLEARED appears.
(Special), and then dial 390.
Mitel ® 8528 Telephone User Guide – Release 6.2, June 2016