Table of Contents
Advertisement
002 - IS THE SCREEN READABLE? (YES, READ AHEAD. NO, GO TO
STEP 004)
NOTE: If the screen shows a blinking cursor with no memory count running,
answer this question "No".
Select Interactive Tests from the Main Menu.
Select and execute Video test from the menu.
Follow the prompts and perform the video test.
Go to "Index of Symptoms, Messages, Error Codes, or Beeps" on page 2-8.
NOTE: You might have to adjust the monitor controls to obtain the best
image.
003 - DOES THE MONITOR SUCCESSFULLY PASS ALL TESTS? (YES,
READ AHEAD. NO, GO TO STEP 004)
You have successfully completed the video diagnostics tests. If the problem
remains, go to "Index of Symptoms, Messages, Error Codes, or Beeps" on
page 2-8.
End.
004 -
Power off the system unit.
Remove the hard disk drive system cable.
Power on the system unit.
005 - IS THE SCREEN READABLE?
Replace the monitor. If the symptom remains, replace the system board.
End.
2-39
Advertisement
Table of Contents
