Section E - Final Installation - Hunter 82043 Instructions Manual

Section E - Final Installation

E1
2 Pin
Fan Motor
Night Light
3 Pin
Light
*Option Fan & Main Light Together
Install the wiring cover box. Make sure all wiring connec-
tions are inside the wiring cover box.
NOTE: Though this final installation section shows the housing mounted to a joist, the final installation procedure is the same
Connect fan wiring harness. DO NOT ALLOW THE FAN TO
HANG FROM THE WIRING HARNESS. INSTALLATION IS
EASIER IF TWO PEOPLE ARE INVOLVED.
Black
White
White
Red Night Light
Black Light
*Option
Connect the wiring as shown.
whether the housing is mounted to a joist or suspended between joists.
43045-01 03/06/2008
Ground
Green
A
Black
Red
Black
Install the fan assembly by inserting the tabs as shown and
pushing the fan assembly into the housing. Make certain the
wiring is not pinched between the fan
assembly and the housing.
14
Bare Copper
Main Switch 1 (AC In)
White
Switch 1 (AC In)
Switch 2 (AC In)