Hunter 82043 Instructions Manual page 13

D5
Install the wiring and the strain relief into the wiring access
hole you made earlier.
D7
Move the housing into the ceiling.
D9
Screw mounting screws into joist or framing.
D6
Connect 6" duct and vent to the outside. Use duct tape to
secure joints. If ducting does not fit securely, an adapter
D8
Position the bottom edge of the housing flush with the
13
43045-01 03/06/2008
may need to be purchased.
5/8
1/2
sheetrock.
5/8
1/2