Table of Contents
Advertisement
Section E - Final Installation
E1
2 Pin
Fan Motor
Night Light
3 Pin
Light
*Option Fan & Main Light Together
E2
Install the wiring cover box. Make sure all wiring connec-
tions are inside the wiring cover box.
NOTE: Though this final installation section shows the housing mounted to a joist, the final installation procedure is the same
whether the housing is mounted to a joist or suspended between joists.
E3
Connect fan wiring harness. DO NOT ALLOW THE FAN TO
HANG FROM THE WIRING HARNESS. INSTALLATION IS
EASIER IF TWO PEOPLE ARE INVOLVED.
Black
White
White
Red
Night Light
Black
Light
*Option
Connect the wiring as shown.
E4
pushing the fan assembly into the housing. Make certain the
14
43045-01 10/15/2009
Ground
Green
A
Bare Copper
Black
Main Switch 1 (AC In)
White
Red
Switch 1 (AC In)
Black
Switch 2 (AC In)
Install the fan assembly by inserting the tabs as shown and
wiring is not pinched between the fan
assembly and the housing.
Advertisement
Table of Contents
