Toshiba RD-97DTKB Owner's Manual page 63

E2J70BD_EN.book Page 63 Friday, June 29, 2007 2:50 PM
Slow Forward /
Slow Reverse Playback
HDD HDD D D VD-V DVD-V VD-V
DVD-R DVD-R D D VD+R DVD+RW VD+RW W
DivX DivX DivX ®
®
1
During playback, press [PAUSE F],
then press [FWD D] or [REV E].
Each time you press [FWD D] or [REV E], the
approximate speed change as follows.
(The sound will remain muted.)
FWD FWD FWD
1 /4x 1 /8x 1 / 1 6x
REV REV REV
To return to normal playback, press [PLAY B].
Hint
• Forward / reverse speeds are indicated with icons as
follows.
Forward (Approx. Speed):
1/16x:
1/8x:
1/3x:
Reverse (Approx. Speed):
1/16x:
1/8x:
1/4x:
Note
• For some DivX files, Slow forward may not function.
®
• Only slow forward is available when playing back
Video CDs and discs with DivX
Zoom
D D VD-V DVD-V VD-V
HDD HDD
DVD-R DVD-R DVD+RW D D VD+R VD+RW W
JPEG JPEG JPEG DivX DivX DivX ®
®
1
During playback, press [ZOOM].
T 1/ 5 C 1/ 5
Four options are available, "x1.0", "x1.2", "x1.5"
and "x2.0". These are displayed excluding the
current zoom rate.
Hint
• You can also select the zoom function by pressing
[DISPLAY]. In this case, press [DISPLAY] first,
icon using [L \ P], and then press
select the
[ENTER/OK] within 1 second, or wait for 1 second
to display the selection menu.
Video VR
DVD-RW D D VD-R VD-RW W DVD-RW DVD-RW
DVD+R D D VD+R VD+R VCD VCD VCD
FWD FWD FWD
1 / 1 6x 1 /8x 1 /3x
Pause
REV REV REV
files.
®
Video VR
DVD-RW D D VD-R VD-RW W DVD-RW DVD-RW
DVD+R D D VD+R VD+R VCD VCD VCD
0:01:00 / 1:23:45
DVD Video
× 1.2
× 1.5
× 2.0
2
Select the desired zoom factor to
zoom using [U \ D], then press
[ENTER/OK].
The zoom area is displayed.
3
Select the desired zoom position
using [U \ D \ L \ P], then press
[ENTER/OK].
Zoom playback will start.
Hint
• To exit the zoom menu, press [ZOOM] at step 1.
• To cancel the zoom function, select "x1.0" using
[U \ D], then press [ENTER/OK].
Note
• If selecting a smaller factor than that currently
selected, the zoom area is not displayed.
• You cannot slide the zoomed picture on some JPEG
files.
Marker Setup
Video
HDD HDD DVD-V D D VD-V VD-V D D VD-R DVD-RW VD-RW W
DVD-R DVD-R DVD+RW D D VD+R VD+RW W D D VD+R DVD+R VD+R
You can assign a specific point on a disc to return
later.
1
During playback, press [DISPLAY].
2
icon using [L \ P],
Select the
then press [ENTER/OK] within 1
second, or wait for 1 second to
display the marker list.
Marker setup menu for DVD-Video
T 1/ 5 C 1/ 5 0:01:00 / 1:23:45
---
1
---
2
---
3
---
4
---
5
---
6
3
Select the desired marker number
using [U \ D]. When the disc
reaches the desired point, press
[ENTER/OK].
The title (track) number and the time are
displayed.
4
To return to the marker, select the
desired marker number using
[U \ D], then press [ENTER/OK].
Hint
• To clear a marker, select the marker number you
wish to clear, then press [CLEAR].
• You can mark up to 6 points.
VR
DVD-RW DVD-RW
CD CD CD VCD VCD VCD
(PBC OFF)
DVD Video
63
EN