Toshiba RD-97DTKB Owner's Manual page 36

E2J70BD_EN.book Page 36 Friday, June 29, 2007 2:50 PM
Setting Aspect Ratio for Video Mode
Recording
Video
DVD-RW DVD-RW DVD-R DVD-R
You can set aspect ratio for video mode recording.
1
In stop mode, press [SETUP]. Select
"General Setting" using [U \ D],
then press [ENTER/OK].
2
Select "Recording" using [U \ D],
then press [ENTER/OK].
3
Select "Aspect Ratio (Video mode)"
using [U \ D], then press
[ENTER/OK].
4
Select your desired setting using
[U \ D], then press [ENTER/OK].
Aspect Ratio (Video mode)
Auto
4 : 3
16 : 9
Auto (default): It will be recorded with whichever the
ratio that the programme you started
to record is broadcasted with.
4:3 : Recorded in the aspect ratio of 4:3.
16:9 : Recorded in the aspect ratio of 16:9.
5
Press [SETUP] to exit.
Note
• For HDD and VR mode DVD-RW disc, the image will
be recorded in whichever the ratio that the
programme you record is broadcasted with,
regardless of the "Aspect Ratio (Video mode)"
setting.
• For DVD+RW/+R disc, the image will always be
recorded in aspect ratio of 4:3.
Setting Auto Chapter
Video
HDD HDD
DVD-RW D D VD-R VD-RW W
DVD+RW D D VD+R VD+RW W D D VD+R DVD+R VD+R
The unit inserts a chapter mark periodically (every 15
minutes by default) during recording. Using the Auto
Chapter menu, you can set this function off or change
the time period.
1
In stop mode, press [SETUP]. Select
"General Setting" using [U \ D],
then press [ENTER/OK].
2
Select "Recording" using [U \ D],
then press [ENTER/OK].
36
EN
VR
DVD-RW DVD-RW DVD-R DVD-R
3
Select "Auto Chapter" using [U \ D],
then press [ENTER/OK].
General Setting
Playback
Display Auto Chapter
Video Recording Audio Select (XP)
Recording Auto Finalise
Clock Aspect Ratio (Video mode)
Channel Make Recording Compatible
DivX Bilingual Recording Audio
HDMI External Input Audio
Reset All
4
If you wish to set "Auto Chapter" off,
select "OFF" using [U \ D], then
press [ENTER/OK].
Auto Chapter
OFF
5 minutes
10 minutes
15 minutes
30 minutes
60 minutes
If you wish to change the time period for
Auto Chapter, select the required time
period using [U \ D], then press
[ENTER/OK].
5
Press [SETUP] to exit.
Note
• The interval for auto chapter marks may slightly
deviate from the one you specified on the Auto
chapter screen.
• A blank chapter may be created depending on the
remaining time of the disc.