Table of Contents
Advertisement
E2J70BD_EN.book Page 27 Friday, June 29, 2007 2:50 PM
Manual Tuning (DVB)
DVB
You can preset a DVB channel manually and
individually.
1
Follow steps
1
(DVB)" on page 26.
2
Select "Manual Tuning" using
[U \ D], then press [ENTER/OK].
3
Select your desired position number
using [U \ D], then press [ENTER/
OK].
Manual Tuning (DVB)
Channel
• The tuner will begin to search up or down
automatically. When a DVB channel is found,
the unit will stop searching.
• When "Auto" is selected the unit will search for
the channels which have not been stored in
channels memory.
4
Press [GREEN] to activate the
setting.
To Select a Channel
You can select memorised channels by using
[PROG. G / H]. For DVB channels, you can use the
favourite lists (TV1-TV4) to loop channels only within
the favourite list. (Refer to "TV Title List" on page 28.)
You can select a channel using [PROG. G / H] or
directly enter the channel using
[the Number buttons] on the remote control.
Notes on using [the Number buttons]:
• For one or two digit number channels, the channels
will be identified 2 seconds after you press the
channel number, or right after you press
[ENTER/OK]. For example, if you want to select
channel 6, press [6] and wait for 2 seconds or press
[ENTER/OK]. You can only select channels 1 to
999.
• Analogue channels will be stored in channel 901-
999 and DVB channels will be stored in channel 1-
900 after it is scanned by this unit.
to
in "Auto Tuning
3
Auto
To switch DVB, analogue and external input (AV1/
AV2/AV3/DV(AV4)) mode.
You can switch between DVB, analogue and external
input (AV1/AV2/AV3/DV(AV4)) mode by pressing
[INPUT SELECT F] repeatedly. The mode changes
as follows:
DVB mode
Analogue mode
AV1
• You can also switch the mode by using
[PROG. G / H].
• You cannot select any DVB channels using
[the Number buttons] when you are in analogue or
external input (AV1/AV2/AV3/DV(AV4)) mode.
• You cannot select any analogue channels using
[the Number buttons] when you are in DVB mode.
Edit Channels
With the EDIT CHANNELS screen, you can see all
memorised DVB channels, create favourite lists and
set the viewer limitation to channels (Adult lock).
To display EDIT CHANNELS screen, after following
steps 1 to 3 in "Auto Tuning (DVB)" on page 26, select
"Edit Channels" using [U \ D], then press [ENTER/
OK].
Guide to EDIT CHANNELS screen
EDIT CHANNELS
#
NAME
1
Channel 1
2
Channel 2
3
L
Channel 3
4
Channel 4
1
5
Channel 5
6
L
Channel 6
7
Channel 7
8
Channel 8
TV LIST
ADULT LOCK
2
3
4
1 Channel numbers.
2 Appears when the channel is locked for the
Adult Lock.
3 Channel names.
4 Type of displayed TV title list.
5 Indicates the registered favourite list number
for the channels.
The EDIT CHANNELS screen consist of list of the all
memorised DVB channels (TV LIST), and four
favourite lists (TV1 - TV4). You can switch between
those channels by pressing [GREEN] repeatedly.
CH List
Favourite
Favourite
(TV List)
List
List
(TV 1)
(TV 2)
• If the favourite list does not have any channels, the
list will be skipped.
• If there are more than one page of the CH List (TV
List) or the favourite list (TV1 -TV4), you can turn the
pages by using [L \ P].
AV2
AV3
DV(AV4)
1
2
3
4
1
2
4
1
3
1
2 3
1
5
Favourite
Favourite
List
List
(TV 3)
(TV 4)
27
EN
Advertisement
Table of Contents
