Table of Contents
Advertisement
E2J70BD_EN.book Page 21 Friday, June 29, 2007 2:50 PM
Selecting Progressive Scan (576p/480p or
Interlaced 576i/480i) Playback
• If your TV is compatible with progressive scanning
(576p/480p), connect the TV to the COMPONENT
VIDEO OUTPUT jacks of this unit and set
"Video Out" setting to "Component Progressive (P)"
in the setup menu (See page 84.). Next, set your TV
to the progressive scan mode.
• If your TV is not compatible with progressive scan,
set "Video Out" setting to "Component Interlace (I)".
• Use a commercially available adaptor if the Video
input jacks of your TVs or monitors are the BNC
type.
Using the COMPONENT VIDEO OUTPUT
jacks and the AUDIO OUT (ANALOG L/R)
jacks
If your TV has Component Video input jacks, use a
Component Video cable and an Audio cable (to
connect the AUDIO OUT (ANALOG L/R) jacks).
• Component connection provides the better quality
picture.
3
Follow step
1
to
4
Connect COMPONENT VIDEO
OUTPUT jacks of this unit to the
Component Video input jacks of your
TV. Use a commercially available
Component video cable.
5
Connect the AUDIO OUT
(ANALOG L/R) jacks of this unit to
the analogue Audio input jacks of
your TV. Use a commercially
available Audio cable.
AUDIO IN
Audio cable
(not supplied)
DVB-T
• After you have made the connections, set the "Video
Out" setting. (See page 84.)
Note for a TV with no Scart socket:
• This unit has no RF modulator, so this type of TV
cannot be used.
• Only component and HDMI connections are
compatible with the Progressive Scan.
2
on page 20.
Component
Video IN
Y
P
B
/C
B
P
R
/C
R
Component
Video Cable
(not supplied)
IN
Y
DIGITAL COAXIAL
HDMI OUT
P
B
/C
B
ANALOG
L
P
R
/C
R
OUT
ANALOG
R
AV1 (T
ANALOG
AV2 (DECODER)
AUDIO
COMPONENT
ANTENNA
OUT
VIDEO OUTPUT
Connection to a TV with an HDMI
Compatible Port
[HDMI CONNECTION]
A simple 1-cable connection with a device having an
HDMI (high-definition multimedia interface) connector
allows digital transfer of the digital images of
DVD-video and other devices. This is the best method
to connect this unit. It can minimise the deterioration
of image quality.
Use the HDMI cable (commercially available) for
connection.
Connect the HDMI output jack of this unit to the HDMI
input jack of TV.
HDMI cable (not supplied)
HDMI OUT
this unit
Selecting HDMI mode
Press [HDMI] to select the HDMI output mode. The
output mode changes as follows every time [HDMI] is
pressed. 576p (PAL) / 480p (NTSC)
1080p (An HDMI mode that is not supported by the
display device will be skipped.)
Actual Output Modes by Media
Dolby Digital /
Audio recording format
DTS / MPEG
of the disc
setting of this unit
PCM
Dolby
Digital
Stream
PCM
LPCM
Stream
DVD-video
OFF
DTS
ON
PCM
MPEG
Stream
PCM
Dolby
Digital
Stream
PCM
®
DivX
MP3
Stream
PCM
MP2
Stream
For audio CD, video CD and MP3 files, 2 channel
PCM will be output regardless of the "Dolby Digital"
setting.
If the connected device is not compatible with HDMI
BITSTREAM, audio will be output as PCM even if you
select "Stream" in "Dolby Digital" setting. (See page
82.)
To HDMI
input jack
HDMI IN
TV
720p
1080i
Actual output
2channel PCM
Dolby Digital
2channel PCM
-
DTS
2channel PCM
MPEG
2channel PCM
Dolby Digital
2channel PCM
2channel PCM
MPEG
21
EN
Advertisement
Table of Contents
