CDA HG3601FR Manual For Installation, Use And Maintenance page 13

Correct Positioning of the Semi-rapid and Rapid Burners
– It is very important to check that the burner flame spreader F and the cap
C have been correctly positioned (see figs. 13 and 14). They shall be level
and must not rotate.
Failure to do so can cause serious problems.
– The pan supports shall be correctly positioned as indicated in fig. 15. The
pan supports shall be level and must not rotate.
Ignitor "S"
Fig. 13
C
F
Sensor "T"
Model:
HG3602FR
Fig. 14
Fig. 15
13