Adjusting The Feet; Moving The Washing Machine And Transport After Installation - Asko WMC67 P Series User Manual

Installation and connection
Stacking an ASKO dryer on top of an ASKO washing machine
To stack an ASKO dryer on top of a washing machine, use the extra vacuum feet and the tipping
guard (A+B), supplied in the cardboard box in the ASKO dryer drum.

Adjusting the feet

Place the washing machine so that it is stable.

Moving the washing machine and transport after installation

If you are moving the washing machine without packaging, open the washing machine door and
pull the appliance by holding the washing assembly, as indicated in the figure.
14
1. Level the washing machine in longitudinal
and traverse direction by rotating the
adjustable feet (using a No. 32 spanner).
The feet allow levelling by +/- 1 cm.
2. When the appropriate height of feet is set,
use the wrench No. 17 to firmly fasten the
counter-nuts towards the bottom of the
appliance .
3. Tighten the jam nuts (counter nuts) to the end
position.
This will reduce washing machine noise,
vibration, movement etc. to minimum.