M.2 solid-state drive bracket
Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
For access, remove these parts in order, if any:
• "Left side cover" on page 54
• "M.2 solid-state drive and heat sink" on page 81
Removal steps
Memory module
Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
Ensure that you follow the installation order for memory modules shown in the following illustration.
For access, remove the "Left side cover" on page 54.
84
P3 Tower Hardware Maintenance Manual