Cover presence switch
Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
For access, do the following:
1. Remove "Left side cover" on page 54.
2. Disconnect the cover presence switch cable from the system board.
Removal steps
Step
Screw (quantity)
1
#6-32 × 5 mm, Nickel coated (1)
Internal speaker
Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
For access, do the following:
1. Remove the Left side cover.
2. Disconnect the internal speaker cable from the system board.
Torque
5.0 ± 0.5 in-lb
.
Chapter 7
Hardware removal and installation
79