b. Remove the M.2 solid-state drive.
c. Install the M.2 solid-state drive.
d. Insert the stopper.
5. Reinstall all the removed parts. Then, reconnect the power cord and all disconnected cables to the
computer.
M.2 solid-state drive bracket
Prerequisite
Before you start, read Appendix A "Important safety information" on page 63 and print the following
instructions.
Replacement procedure
1. Remove the computer cover. See "Computer cover" on page 33.
2. Remove the front bezel. See "Front bezel" on page 34.
3. Remove the drive bay assembly. See "Drive bay assembly" on page 37.
4. Remove the M.2 solid-state drive. See "M.2 solid-state drive" on page 47.
.
Chapter 8
CRU replacement
49