Table of Contents
Advertisement
Removal steps
Step
Screw (quantity)
1
#6-32 × 7.5 mm, Nickel coated (2)
Note: If a locking device is available, use it to lock the computer after installing the left side cover.
Side fan with bracket
Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
For access, do the following:
1. Remove the "Left side cover" on page 54.
2. Disconnect the side fan cable from the side fan connector on the system board.
Torque
5.0 ± 0.5 in-lb
.
Chapter 7
Hardware removal and installation
55
Advertisement
Table of Contents
