Table of Contents
Advertisement
22 TROUBLESHOOTING
Faults
Engine does not crank when
the electric starter button is
pressed
Engine turns only if the clutch
lever is drawn
Engine turns but does not start
246
Possible cause
Operating error
12 V battery discharged
Fuse 1, 2 or 3 blown
Main fuse burned out
No ground connection present
The vehicle is in gear
The vehicle is in gear and the
side stand is folded out
Operating error
Fuse 3 blown
The plug-in connection of the
fuel hose connection is not
connected
Error in the electronic fuel
injection
Action
–
Carry out the start procedure.
(
p. 106)
–
Charge the 12-V battery.
–
Check the open-circuit current.
–
Change the fuses of individual power
consumers. (
p. 199)
–
Change the main fuse. (
–
Check the ground connection.
–
Shift the transmission to neutral posi-
tion.
–
Shift the transmission to neutral posi-
tion.
–
Carry out the start procedure.
(
p. 106)
–
Change the fuses of individual power
consumers. (
p. 199)
–
Connect the plug-in connection of the
fuel line.
–
Read out the fault memory using the
KTM diagnostics tool.
(
p. 191)
p. 195)
Advertisement
Table of Contents
