Table of Contents
Advertisement
13.14
Checking the chain, rear sprocket, engine sprocket, and chain guide
Guideline
Nut, rear wheel
spindle
Finishing work
–
Check the chain tension. (
–
Remove the rear of the motorcycle from the lifting gear.
(
p. 131)
Preparatory work
–
Raise the motorcycle with the rear lifting gear. (
Main work
–
Check the rear sprocket and engine sprocket for wear.
»
If the rear sprocket and engine sprocket are worn:
–
Change the drivetrain kit.
100132-10
SERVICE WORK ON THE CHASSIS 13
M25x1.5
90 Nm (66.4 lbf ft)
Thread and contact area
of wheel spindle greased
p. 143)
Info
The engine sprocket, rear sprocket, and chain
should always be replaced together.
p. 131)
147
Advertisement
Table of Contents
