–
Remove bleeder screw
–
Tilt the vehicle slightly to the right.
–
Pour in coolant until it emerges without bubbles at the vent
hole, and then mount and tighten bleeder screw
ately.
Coolant
–
Completely fill the radiator with coolant. Mount radiator
V01258-11
2
cap
.
–
Rest the vehicle on the side stand.
Danger
Danger of poisoning Exhaust gases are toxic and inhal-
ing them may result in unconsciousness and death.
–
Always make sure there is sufficient ventilation
when running the engine.
–
Use effective exhaust extraction when starting or
running the engine in an enclosed space.
–
Start the engine and run it until the 5th bar of the temperature
indicator lights up.
–
Stop the engine and allow it to cool down.
COOLING SYSTEM 17
3
.
3
1.20 l
Coolant (
(1.27 qt.)
immedi-
p. 271)
223