Table of Contents
Advertisement
22 TROUBLESHOOTING
Faults
Malfunction indicator lamp
lights up or flashes
N The idling speed indicator
lamp does not light up when
the transmission is in neutral
Engine dies during the trip
The ABS warning lamp lights
up
High oil consumption
Headlight and position light are
not functioning
248
Possible cause
Error in the electronic fuel
injection
Gear position sensor not pro-
grammed
Lack of fuel
Fuse 1, 2 or 3 blown
ABS fuse is blown
Large difference in wheel
speeds of the front and rear
wheels
Malfunction in ABS
Engine vent hose bent
Engine oil level too high
Engine oil too thin (low viscos-
ity)
Fuse 6 blown
Action
–
Read out the fault memory using the
KTM diagnostics tool.
–
Read out the fault memory using the
KTM diagnostics tool.
–
Refuel. (
p. 123)
–
Change the fuses of individual power
consumers. (
p. 199)
–
Change ABS fuses. (
p. 197)
–
Stop the vehicle, switch off the igni-
tion, and start it again.
–
Read out the ABS fault memory using
the KTM diagnostics tool.
–
Route the vent hose without bends or
change it if necessary.
–
Check the engine oil level. (
–
Change the engine oil and oil filter and
clean the oil screens.
(
–
Change the fuses of individual power
consumers. (
p. 199)
p. 229)
p. 230)
Advertisement
Table of Contents
