Removing the power-adapter
port
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
1
Remove the
base
2
Remove the
battery (half-length)
3
Remove the
display
Procedure
1
Disconnect the power-adapter port cable from the system board.
2
Remove the screw (M2x3) that secures the power-adapter port to the palm-
rest assembly.
computer. After working inside your computer, follow
After working inside your
cover.
or the
assembly.
computer. For more safety best
battery
(full-length).
Before
www.dell.com/
79