Replacing the speakers
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Using the alignment posts, place the speakers on the palm-rest assembly.
2
Replace the four screws (M2x2) that secure the speakers to the palm-rest
assembly.
3
Route the speaker cables through the routing guides on the palm-rest assembly.
4
Connect the speaker cable to the system board.
Post-requisites
1
Replace the
battery (half-length)
2
Replace the
base
computer. After working inside your computer, follow
After working inside your
or the
cover.
computer. For more safety best
battery
(full-length).
Before
www.dell.com/
41