Replace Transaxle Drive Belt - Gravely Pro-Turn 400 Series Operator's Manual

REPLACE TRANSAXLE DRIVE
BELT
Remove Transaxle Drive Belt
1. Place steering levers in neutral position
and engage parking brake.
2. Stop engine, remove key and wait for
moving parts to stop and for hot parts to
cool.
3. Remove PTO belt from clutch. See
Remove PTO Belt on page 34.
CAUTION: Use care when
releasing idler spring tension.
Keep body parts away from
idlers when performing this
operation.
4. Remove hardware retaining transaxle
skid plate and remove skid plate. See
Figure 50.
Figure 50
5. Loosen nut on eye bolt and disconnect
idler arm spring. See Figure 51.
2
1. Spring
2. Transaxle Drive Idler
3. Eye Bolt
6. Remove hardware securing clutch stop
bracket to frame and remove bracket.
See Figure 52.
1
1. Clutch Stop Bracket
2. Clutch
EN - 36
1
Figure 51
2
Figure 52
3