TRANSPORT UNIT
1. Move transport lock release lever
forward.
2. Push deck lift pedal completely forward to
engage transport lock. Release pedal.
3. Move unit to transport vehicle.
4. Stop engine, engage parking brake,
remove key from ignition and turn fuel
valve to off position.
5. Secure mower frame to transport vehicle.
NOTICE: NEVER secure unit to vehicle from
rods or linkages that could be damaged.
RELEASE TRANSPORT LOCK
1. Push deck lift pedal forward and move
transport lock release lever to the rear
position.
2. Slowly return mower lift pedal to resting
position.
MAINTENANCE
WARNING: AVOID INJURY.
Read and understand the Safety
section before proceeding.
Proper maintenance can prolong the life of
unit. The Maintenance Schedule on Page 23
shows the recommended service schedule.
Your Gravely dealer can provide service and
adjustments to keep your unit operating at
peak efficiency. Contact an authorized engine
manufacturer's service center for engine
service.
More frequent service may be required due to
working conditions (heavy loads, high
ambient temperatures, dusty conditions, or
airborne debris).
See the maintenance instructions in the
Engine Manual for additional information.
SERVICE POSITION
See Figure 26.
1. Park unit on a flat, level surface.
2. Engage parking brake and rotate steering
levers outward.
3. Stop engine, remove key and wait for
moving parts to stop and for hot parts to
cool.
4. Pull seat latch and rotate seat forward.
5. Chock wheels. Strap and clamp unit onto
lift, if used.
CAUTION: AVOID INJURY.
Seat assembly is heavy. Secure
your footing to accommodate
weight shift when rotating seat
forward.
HOUR METER
Timer measures engine runtime and cannot
be reset.
MAINTENANCE SCHEDULE
Service Performed
Clean Debris from
Engine
Inspect Belt Cover
Grommets for
Damage
Check Safety
Interlock System
Check Hydraulic
System
Check Engine Oil *
Change Engine Oil *
Check Tire Pressure
Check Mower
Blades
Check Air Filter *
Check Carbon
Canister Filter
Lubricate Unit
EN - 23
Figure 26
•
•
•
•
•
•
•
•
•
•