Table of Contents
Advertisement
User's Guide
1. Place the originals.
Note:
You can send up to 100 pages in one transmission.
2. Pick up the handset of the connected telephone, and then dial the recipient's fax number using the phone.
3. Tap Fax on the home screen.
4. Tap the Fax Settings tab, and then make settings such as the resolution and the sending method as necessary.
5. When you hear a fax tone, tap
Note:
When a number is dialed using the connected telephone, it takes longer to send a fax because the printer performs
scanning and sending simultaneously. While sending the fax, you cannot use the other features.
6. When sending is complete, remove the originals.
Related Information
"Placing Originals" on page 48
&
"Fax Settings" on page 129
&
Various Ways of Sending Faxes
Sending Many Pages of a Monochrome Document (Direct Send)
When sending a fax in monochrome, the scanned document is temporarily stored in the printer's memory.
Therefore, sending a lot of pages may cause the printer to run out of memory and stop sending the fax. You can
avoid this by enabling the Direct Send feature, however, it takes longer to send the fax because the printer
performs scanning and sending simultaneously. You can use this feature when there is only one recipient.
Tap Fax on the home screen, tap the Fax Settings tab, and then tap the Direct Send box to set this to On.
Related Information
"Placing Originals" on page 48
&
"Fax Settings" on page 129
&
Sending Faxes at a Specified Time (Send Fax Later)
You can set to send a fax at a specified time. Only monochrome faxes can be sent when the time to send is
specified.
1. Tap Fax on the home screen.
2. Specify the recipient.
3. Tap the Fax Settings tab.
4. Tap Send Fax Later, and then tap the Send Fax Later box to set this to On.
Faxing
x
, and then hang up the handset.
118
Advertisement
Table of Contents
