Table of Contents
Advertisement
User's Guide
❏ An access point that is compliant with both IEEE802.11a and IEEE802.11g has SSIDs of 2.4 GHz and 5 GHz. If
you connect the computer or smart device to a 5 GHz SSID, you cannot connect to the printer because the
printer only supports communication over 2.4 GHz. Connect the computer or smart device to the same SSID as
the printer.
❏ Most access points have a privacy separator feature that blocks communication between connected devices. If
you cannot communicate between the printer and the computer or smart device even if they are connected to
the same network, disable the privacy separator on the access point. See the manual provided with the access
point for details.
Related Information
"Checking the SSID Connected to the Printer" on page 182
&
"Checking the SSID for the Computer" on page 183
&
Checking the SSID Connected to the Printer
Select Settings > General Settings > Network Settings > Network Status.
You can check the SSID for Wi-Fi and Wi-Fi Direct from each menu.
Solving Problems
182
Advertisement
Table of Contents
