Table of Contents
Advertisement
User's Guide
Various Ways of Receiving Faxes
Receiving Faxes Manually
When you connect a telephone and set the Receive Mode setting of the printer to Manual, follow the steps below
to receive faxes.
1. When the telephone rings, pick up the handset.
2. When you hear a fax tone, tap Fax on the home screen of the printer.
Note:
If you enable the Remote Receive feature, you can start receiving a fax just by using the connected telephone.
3. Tap Send/Receive.
4. Tap Recv.
x
5. Tap
, and then hang up the handset.
Related Information
"Receiving Faxes Using a Connected Telephone (Remote Receive)" on page 122
&
"Saving Received Faxes in the Inbox" on page 124
&
Receiving Faxes Using a Connected Telephone (Remote Receive)
To receive a fax manually, you need to operate the printer after you pick up the handset of the telephone. By using
the Remote Receive feature, you can start receiving a fax just by operating the phone.
The Remote Receive feature is available for telephones that support tone dialing.
Related Information
"Receiving Faxes Manually" on page 122
&
Setting Up Remote Receive
1. Tap Settings on the home screen.
2. Tap General Settings > Fax Settings > Basic Settings > Remote Receive.
3. After enabling Remote Receive, enter a two digit code (0 to 9, *, and # can be entered) in the Start Code field.
4. Tap OK, and then tap OK again.
Related Information
"Basic Settings" on page 134
&
Faxing
122
Advertisement
Table of Contents
