Electrical Lead Entry - Kohler 26RCA Installation Manual

3.1.3

Electrical Lead Entry

Drill or punch holes in the enclosure for the electrical conduit in the locations shown in Figure 23. To avoid interference with the
roof when it is open, use a 90-degree elbow at the AC voltage entry point and direct the conduit away from the roof.
Dimensions are shown in mm [inches].
Figure 23 Electrical Lead Entry Locations
TP-7091 4/23
14/20 RCA/L Models
26 RCA/L Models
DO NOT DRILL HOLES IN
THESE AREAS
ADV- 9746
ADV-9919
33