Kohler 26RCA Installation Manual page 44

Notes:
•
Check the decal on the generator set for terminal block connections.
•
3 runs with 1 module each shown.
•
See Figure 30 for communication connection detail (A and B, PWR and
COM).
•
Use splices or wire nuts to collect multiple leads for connection to the
generator set terminal block. See Figure 33.
Figure 32 Accessory Module Connections (three cable runs with one module each)
Generator Set
1. Generator Set Terminal Block. Check the decal on the generator set for terminal block connections.
2. Splice.
3. Connect all of the shield leads on this end to GROUND at the generator set.
Figure 33 Multiple Connections to the Generator Set
Generator Set
Notes:
•
Check the decal on the generator set for terminal block
connections.
•
See the Communication Cable Specifications section.
•
See Figure 30 for communication connection detail (A and B,
PWR and COM). Connect the cable shield to ground at the
generator set.
•
Use splices or wire nuts to collect multiple leads for connection
to the generator set terminal block. See Figure 33.
Figure 34 Accessory Module Connections (two cable runs with one and two modules shown)
44
Generator Set
Terminal Block
1
3
4
COM
RBUS
PWR
B
12 VDC
A
Terminal Block
2
RXT ATS
Load
Shed Kit
PIM
3
A
B
SHIELDED
CABLE
PWR
COM
3
A
B
SHIELDED
PWR
CABLE
COM
RXT ATS
PIM
Load Shed Kit
TP-7091
tp6803
tp6803
tp6809
4/23