Introduction - Kohler 26RCA Installation Manual

Introduction

This manual provides installation instructions for Residential/Commercial Model 14RCA/L, 20RCA/L, and 26RCA/L generator
sets. See Figure 1. Refer to the Operation Manual for generator set operation and maintenance instructions. RCAL models
include a Kohler model RXT automatic transfer switch (ATS). The ATS installation instructions are provided in a separate manual.
See the List of Related Literature for document part numbers.
The generator set is approved for use in stationary applications in locations served by a reliable utility power source.
Kohler strongly recommends that only factory authorized dealers install and service the generator.
®
Have a Kohler authorized dealer install the generator set outdoors according to the instructions in this manual. The generator
set installation must comply with the National Electrical Code (NEC) and local code requirements.
Do not install or operate this generator set indoors.
Information in this publication represents data available at the time of print. Kohler Co. reserves the right to change this
publication and the products represented without notice and without any obligation or liability whatsoever.
Read this manual and carefully follow all procedures and safety precautions to ensure proper equipment operation and to avoid
bodily injury. Read and follow the Safety Precautions and Instructions section at the beginning of this manual.
aac11780
Figure 1 Generator Set
Warranty Registration
The RDC2 controller requires an unlock code to operate in automatic (AUTO) mode. The unlock code needs to be entered only
once. See TP-7238 for instructions to register the generator set in Kohler Power Assistant and obtain the unlock code. Complete
the startup and installation checklists supplied with the startup notification form.
TP-7091 4/23 11