Wall Mounting The M5208 - Nortel M5208 Manual

4-4 Installation

Wall mounting the M5208

Your telephone set has been prepared at the factory for use on your desk. If
you require the set to be positioned on a wall, follow procedure 4-2.
Procedure 4-2
How to mount the M5208 on the wall
Step
1
2
3
297–2011–213 02.01 Standard February 1999
Action
Turn the telephone set upside down and locate the two
screws (A) in the wedge-shaped base as shown in Figure 4-
2. Remove the screws from the base and set them aside.
Figure 4-2
M5208 wall mounting locations
E F
A
Pull off the wedge-shaped base from the telephone set.
If the set is to be connected to a line cord connecting block
mounted on the wall, push out the knock-out section in the
base (F) as shown in Figure 4-2.
—continued—
E E
A