Section 11: Limited Warranty On Parts - Taylor SLIM7 Operator's Manual

Section 11
TAYLOR COMPANY LIMITED WARRANTY ON GENUINE TAYLOR PARTS
Taylor Company, is pleased to provide this limited warranty on genuine, new Taylor genuine replacement components
and parts available from Taylor to the market generally (the "Parts") to the original purchaser only.
Taylor warrants the Parts against failure due to defect in materials or workmanship under normal use and service as
follows. All warranty periods begin on the date of original installation of the Part in the Taylor product. If a Part fails due
to defects during the applicable warranty period, Taylor, through an authorized Taylor distributor or service agency, will
provide a new or remanufactured Part, at Taylor's option to replace the failed defective Part at no charge for the Part.
Except as otherwise stated herein, these are Taylor's exclusive obligations under this limited warranty for a Part failure.
This limited warranty is subject to all provisions, conditions, limitations, and exclusions listed below and on the reverse
(if any) of this document.
Parts Warranty Class Code or Part
¹
Class 103 Parts
²
Class 212 Parts
Class 512 Parts
Class 000 Parts
1. If the date of original installation of the Part cannot be otherwise verified, proof of purchase may be required at time
of service.
2. This limited warranty is valid only if the Part is installed and all required service work in connection with the Part is
performed by a Taylor-authorized distributor or service agency.
3. The limited warranty applies only to Parts remaining in use by their original owner at their original installation
location in the machine of original installation.
4. Installation, use, care, and maintenance must be normal and in accordance with all instructions contained in the
Taylor Operator's Manual.
5. Defective Parts must be returned to the Taylor-authorized distributor or service agency for credit.
6. This warranty is not intended to shorten the length of any warranty coverage provided pursuant to a separate Taylor
limited warranty on freezer or grill products.
7. The use of any refrigerant other than that specified for the machine in which the Part is installed will void this limited
warranty.
1, 2
Except that Taylor Part #032129SER2 (Compressor-Air-230V SERV) and Taylor Part #075506SER1
(Compressor-Air-115V 60HZ) shall have a limited warranty period of twelve (12) months when used in Taylor freezer
machines and a limited warranty period of two (2) years when used in Taylor grill machines.
Limited Warranty on Parts
Limited Warranty on Parts
LIMITED WARRANTY
Table 11-1
Three (3) Months
Twelve (12) Months
Twelve (12) Months
No Warranty
LIMITED WARRANTY CONDITIONS
Model 0736
Limited Warranty Period
11
11-1