Table of Contents
Advertisement
Heat Button
When the Heat mode button is illuminated, the freezer is
in the process of a Heat cycle.
Standby Button
The Standby feature maintains product temperatures in
both the hopper and the barrel below 40°F (4.4°C). This
feature is useful during long "No Sale" periods to prevent
overbeating and product breakdown.
When Standby is selected, the Standby button
illuminates, indicating the Standby feature has been
activated. In the Standby mode, the Wash and Auto
functions are automatically canceled.
To resume normal operation, press the Auto button.
When the machine cycles off, the product in the barrel
will be at serving viscosity.
Wash Button
The Wash button will illuminate when pressed. This
indicates beater motor operation.
Option Button
The Option button, if pressed simultaneously with the
Auto button and held down for at least 5 seconds, allows
the access to the adjustment menu for the product
consistency and for the agitator motor cycle adjustment
during the Auto mode.
The Option button, if pressed simultaneously with the
Standby button and held down at least 5 seconds, allows
access to the adjustment menu for the product
temperature and for the agitator motor cycle adjustment
during the Standby mode.
STOP Button
The STOP button will illuminate when pressed. This
indicates the machine is off.
Mix Hopper Agitator
When the Mix Hopper button is illuminated, the agitator in
the hopper is on.
Keypad Lock
To lock the control panel and prevent accidental use
(ex: self-service applications) press and hold the OK
button for at least 5 seconds; the closed padlock icon
appears on the left side of the display to indicate that
each function pushbutton is disabled.
To unlock the control panel, press and hold the OK button
for at least 5 seconds.
User Interface
Operating Screen Description
When the machine is powered, the control system will
initialize to perform a system check. The screen will
display the Taylor logo for a few seconds.
Main Power Switch OFF
When the main power switch is OFF, the following screen
is displayed in international date sequence (DD/MM/YY).
Main Power Switch ON
When the main power switch is placed in the ON
position, the control panel buttons become operative and
the following screen is displayed:
:
Heat Cycle
The Heat Cycle button on the control panel is illuminated
throughout the Heat Treatment Cycle.
•
Do not attempt to draw product or disassemble the
machine during the Heat cycle. The product is hot
and under extreme pressure.
In the Heat cycle, the mix temperature in the hopper and
barrel must be raised to 156°F (69°C) within 90 minutes.
When the heating phase is complete, the freezer goes
into the holding phase of the cycle. The holding phase
will keep the temperature above 156°F (69°C) for a
Model 0736
USER INTERFACE
Figure 5-3
Figure 5-4
5
5-3
Advertisement
Table of Contents
Troubleshooting
