Manager's Menu; Manager Menu Options - Taylor SLIM7 Operator's Manual

Manager's Menu

The Manager's Menu is used to enter the operator
function displays. To access the Menu, press the SEL
button.
In the Menu program, the Arrow buttons, the OK button,
and the C button will function as menu buttons.
• Up Arrow—increases the value above the cursor and
is used to scroll upward in text displays.
• Down Arrow—decreases the value above the cursor
and is used to scroll downward in text displays.
• OK—Confirms the selected value.
• C—Deletes the selected value.
There is a 1-minute time-out in effect during the
Manager's Menu. While in the Manager's Menu, if no
activity occurs within a 1-minute period, the display will
exit to the main screen.
Note: The machine will continue operation in the mode
it was in when the Menu was selected. However, the
control buttons will not be lit and are non-functional when
the Manager's Menu is displayed.
Figure 5-6
User Interface

Manager Menu Options

Press the SEL button to enter in the Manager's Menu.
Press the Arrow buttons to move up or down through the
Menu. Select a Menu option by pressing the OK button.
The following menu options are listed in the Manager's
Menu.
• SERVINGS COUNTER
• SET CLOCK
• AUTO HEAT TIME
• AUTO START TIME
• AUTO STANDBY TIME
• EVENT HISTORY
• LOCKOUT HISTORY
• HEAT CYCLE SUMMARY
• HEAT CYCLE DATA
• SYSTEM INFORMATION
• LANGUAGE
Exit the Menu program by touching the STOP or
C button.
Servings Counter
The SERVINGS COUNTER option is used to check the
total and partial number of servings dispensed from the
machine. The partial counter will automatically reset to
zero when the machine is cleaned; you can also reset
this counter manually by selecting the OK button to
confirm the operation.
The total counter cannot be reset by the operator.
Model 0736
USER INTERFACE
Figure 5-7
5
5-5