Table of Contents
Advertisement
06/03/06 13:49:06 3CMCJ600_094
DRIVE CHAIN
(Refer to the maintenance precautions on
page
77
).
The service life of the drive chain is
dependent upon proper lubrication and
adjustment. Poor maintenance can cause
premature wear or damage to the drive
chain and sprockets.
The drive chain should be checked and
lubricated as part of the Pre-ride Inspection
(page
62
). Under severe usage, or when
the motorcycle is ridden in unusually dusty
o r m u d d y a r e a s , m o r e f r e q u e n t
maintenance will be necessary.
Inspection :
1.
Turn the engine off, place the motorcycle
on it s side st and and shif t t he
transmission into neutral.
2.
Check slack in the lower drive chain run
midway between the sprockets.
Drive chain slack should be adjusted to
allow the following vertical movement by
hand:
40 50 mm (1.6 2.0 in)
−
−
88
3.
Roll the motorcycle forward. Stop. Check
drive chain slack. Repeat this procedure
several times. Drive chain slack should
remain constant. If the chain is slack only
in certain sections, some links are kinked
and binding. Binding and kinking can
frequently be eliminated by lubrication.
(1)
(1) Drive chain
Advertisement
Table of Contents
