Table of Contents
Advertisement
06/03/06 13:43:38 3CMCJ600_041
3.
Remove the right middle fairing (page
58) .
4.
Loosen the lock nut ( ) at the lower end
of the cable. Turn the adjusting nut ( ) to
obtain the specified free play. Tighten the
lock nut ( ) and check the adjustment.
5
5.
Install the right middle fairing.
6.
Start the engine, pull in the clutch lever
and shift into gear. Make sure the engine
does not stall and the motorcycle does
not creep. Gradually release the clutch
lever and open the throttle. T he
motorcycle should begin to move
smoothly and accelerate gradually.
If proper adjustment cannot be obtained
or the clutch does not work correctly, see
your Honda dealer.
Other Checks:
Check the clutch cable for kinks or signs of
wear that could cause sticking or failure.
L ubricate the clutch cable w it h a
commercially available cable lubricant to
prevent premature wear and corrosion.
5
(5)
4
(4) Adjusting nut
(5) Lock nut
(4)
(
(
A
A
)
)
(
(
B
B
)
)
(A) Increase free play
(B) Decrease free play
35
Advertisement
Table of Contents
