Spark Plugs - Honda FIRE BLADE 1999 Owner's Manual

06/03/06 13:48:28 3CMCJ600_088

SPARK PLUGS

(Refer to the maintenance precautions on
page 77 ).
Recommended plugs:
Standard:
IUH27D (DENSO)
For cold climate: (Below 5 °C, 41 °F)
IUH24D (DENSO)
This motorcycle uses the spark plugs that
have a iridium coated center electrode. Be
sure to observe the following when
servicing the spark plugs.
Do not clean the spark plug. If the
e l e c t r o d e i s c o n t a m i n a t e d w i t h
accumulated objects or dirt, replace the
spark plug with a new one.
Use only ''wire-type feeler gauge'' to
check the spark plug gap to prevent
damaging the iridium coating of the
center electrodes. Never use ''leaf-type
feeler gauge''.
Do not adjust the spark plug gap. If the
gap is out of specification, replace the
spark plug with a new one.
82
1. Remove the middle fairing (page 58) and
the lower fairing (page 59).
2. Disconnect the radiator fan connector (1).
3. Disconnect the thermo switch connector
(2).
4. Remove the nut (3) and lower radiator
mounting bolt (4).
5. Remove the upper radiator mounting bolt
(5).
(5)
(2)
(3)
(4)
(1) Radiator fan connector
(2) Thermo switch connector
(3) Nut
(4) Lower radiator mounting bolt
(5) Upper radiator mounting bolt
(1)