Data Entry; Table 11 - Three-Button Data Entry - Honeywell SmartLine ST 700 User Manual

5.2.2 Data Entry

Data entry is performed from left to right. Select a character / digit by pressing  or  buttons, and

then press to advance to the next character position to the right. Select the cross-hatch character
to terminate the entry or if the final character is already a space character, just press
All numeric entries are clamped at the low or high limit if needed. You can determine the low and
high limit for a parameter by selecting either the
the left-most digit and press
Screen
Symbol
Display the high limit for this parameter.
H
This symbol only appears in the left-most
position of the data entry field.
Display the low limit for this parameter.
L
This symbol only appears in the left-most
position of the data entry field.
<<
Terminate the numeric entry.
0 thru 9, These characters are used to enter
Minus, numeric values. The minus sign only
Decimal appears in the left-most digit.
Page 48

button. The display will show the selected limit.
Table 11 – Three-Button Data Entry
Numeric data entry
ST 700 SmartLine Pressure Transmitters User's Manual
H L
or character while the cursor is positioned over
Not Available
Not Available
Terminate the text entry
These characters can be used to
enter the Tag ID
<<
again.
Text entry
Revision 13
▒