Replacing An I2004 Internet Telephone - Nortel Meridian 1 Succession 1000 Description

Replacing an i2004 Internet Telephone

a. Disable password.
b. Set password as non-NULL.
3 Press OK when the node number displays.
If
node password is enabled and is
not NULL
node password is disabled
4 Enter password at the password screen and press OK.
A TN screen displays.
5 Select the Clear soft key to clear the existing TN.
A new parameters prompt displays.
Two telephones cannot share the same TN. You must remove the i2004
Internet Telephone that is currently using the TN.
Procedure 11
Replacing an i2004 Internet Telephone
1 Disconnect the i2004 Internet Telephone that you want to replace.
2 Follow either Procedure 8 on
Procedure 9 on
the i2004 Internet Telephone.
i2004 Internet Telephone
End of Procedure
IMPORTANT!
page 63
page 67 (dynamic IP assignment) to install and configure
Then
a password screen displays. Go to
step 4.
a TN screen displays. Go to
step 5.
(static IP assignment) or
Internet Terminals
Page 71 of 184
Description