Page 136 of 184
553-3001-368
Standard 1.00
Configure programmable line (DN)/feature key labels
a.
Select Restore all key labels.
b.
Select the Yes soft key to change all feature keys to the default
values.
Note: When Yes is selected and the values are changed to the default
values, you can not undo the change. Feature key labels are erased in the
Call Server memory. The label settings must be re-entered.
c.
Select Restore one key label.
i.
Press Select.
ii.
Press a feature label key.
iii. Select Yes to change the selected feature label key to the
default value.
Table 23
Change Feature keys screen features (Part 1 of 2)
Select this key...
Delete
Cancel
Case
More
Number 1-9
Up navigation
October 2003
End of Procedure
To...
Backspace one character.
The action is aborted. The display returns to the
default Change Feature Keys submenu.
Switch the next character to either uppercase or
lowercase.
Switch pages.
Toggle characters.
Display a screen to enter special characters.
Use the Up and Down keys to navigate through the
lists of available special characters.