To Check The Printer Parallel Port ( For Serial Prefix Jp1Kh, Jp2Kh, And My432); To Check The Printer Usb Port ( For Serial Prefix My433 And Later); To Check The Gpib - Agilent Technologies E4991A Service Manual

Troubleshooting
Function Depend Troubleshooting
To check the Printer Parallel port ( for serial prefix JP1KH, JP2KH,
and MY432)
Test Equipment
Please refer
http://www.agilent.com/find/ctdkobe_printers
for the latest supported printers.
Printer Cable (Parallel Cable)
Procedure
Step 1. Connect the printer cable between the printer and the E4991A printer parallel port.
Step 2. Press key. Then the E4991A is initialized.
[Preset]
Step 3. Start printing by following mouse procedure. Then Press
-
Display PRINT
Step 4. If any fail to work, there is a possibility that the A20 Digital Mother board, connection of
the printer cable or the printer driver gives problem.

To check the Printer USB port ( for serial prefix MY433 and later)

Test Equipment
Please refer
http://www.agilent.com/find/ctdkobe_printers
for the latest supported printers.
Printer Cable (USB Cable)
Procedure
Step 1. Connect the printer cable between the printer and the E4991A USB port.
Step 2. Press key. Then the E4991A is initialized.
[Preset]
Step 3. Start printing by following mouse procedure. Then Press
-
Display PRINT
Step 4. If any fail to work, there is a possibility that the A20 Digital Mother board, connection of
the printer cable or the printer driver gives problem.

To check the GPIB

Procedure
Perform the E4991A performance test program. If the controller can not detect the
E4991A, there is a possibility that the A24 GPIB board or connection of the GPIB cable
gives problem.
188
-
Graph[Mono]
-
Graph[Mono]
on Print Menu.
OK
on Print Menu.
OK
Chapter 4