Panasonic DP-150 Service Manual page 95

E5 : System
Error
Item
code
E5-01 DC24V power supply abnormality
E5-04 DC12V power supply abnormality
E5-05 Scanner 24V power supply
abnormality
E5-18 Shading adjustment error
E5-30 Energy-saver microcomputer
failure
E5-35 FROM card write error
E5-41 Registration control PCB malfunction The optics scanning or registration is
E5-42 Total counter error
E5-50 FIFO operation error
E5-55 PM2 error
E5-58 D/A transfer failure
E5-59 Scanner LSYNC abnormality SLSYNC interruption timeout error when detecting a peak
E5-72 GA#1 α 1 access failure
E5-73 GA#1 α 2 access failure
E5-74 GA#1 α SRAM access failure
E5-75 GA#1 α CLK access failure
E5-76 GA#2 access failure
E5-77 GA#3 R/W error
E5-89 GA#1 R/W error
E5-99 Fatal error
5-14
Description
Fail to output DC24V.
Fail to output DC12V when ready.
Detect an error with the scanner 24V power supply control.
An error occurs when adjusting the shading (black or white).
Communication error of the energy-saver microcomputer.
Write error for the flash ROM.
• working despite the assignment to stop it.
• not working within the defined time despite the assignment
to work.
Counter cable is disconnected
Detect the operation failure of FIFO.
PM2 stops abnormally.
DAC transfer completion interruption timeout error for CCD
setting.
GA#1 α 1 verify error (Image processing format error)
GA#1 α 2 verify error (Other errors)
GA#1 α built-in SRAM error
GA#1 α built-in white shading RAM error
GA#2 verify error
GA#3 Read/Write hard error
GA#1 Read/Write hard error
Fatal error occurs with unknown case.